Sensut on 26/9/2012 at 12:28
Quote Posted by klatremus
Upon playing Mission X for a little while I have noticed a few hickups.
1) Some objects turn invisible or are missing parts of textures in the inventory. One of the loot bracelets was invisible when hanging inside a locker, and continued to be invisible in the inventory. Similarly, the compass is missing parts in the inventory.
2) The biggest and most reliable bug however was the light gem. If bright red, sometimes the entire gem would turn black. The indicator to the right was still red, but the rest of the gem was pitch black. This has happened in multiple areas and seems to occur more often if crouching. Has anyone else seen this?
Maybe this is the solution (from "troubleshooting"):
Code:
Problem:
Some object textures are invisible (on some ATI/AMD video cards).
Cause:
Adaptive multi-sample anti-aliasing.
Solutions:
* Go into Catalyst Control Center and set "Anti-Aliasing Mode" to
any setting that is NOT "Adaptive Multi-sample AA".
* Disable multi-sampling ("multisampletype").
retractingblinds on 26/9/2012 at 12:32
I'm having a good deal of misfortune getting this patch to work with Thief Gold. I've followed the installation instructions, checked out the readme in the /docs/t1.zip directory, changed the game running to read 'dark1' exclusively (sans apostrophes), and still, no dice. The game boots, and crashes immediately. I've looked for ; enable Thief 1 compatibility in cam_ext.cfg and found no such line. I'm at quite a wall here with no clue what solutions to try.
Anyone care to treat me like an idiot and give me a step-by-step setup for a fresh install? If it's of any assistance, I am running a GoG copy on WinXP.
ToxicFrog on 26/9/2012 at 12:33
Quote Posted by Muzman
Apart from general amazement, my first question is "How?"
I'm behind on all the leaks and reverse engineering going on, but isn't this even far beyond what anyone was hoping to do short of the full annotated source code appearing?
Or was it finally dug up and I missed it?
The source code
did appear. It was huge news.
It wasn't an official release by Eidos/EA, though, it was (IIRC) someone finding a CD containing a half-finished Dreamcast port of Thief 2 (with most of the code for SS2 still intact, since T2 uses a later version of the same engine) in a box of LGS memorabilia. So there was a lot of concern over Eidos/EA handing out cease-and-desist letters or lawsuits if anyone tried to actually do anything with it. I don't recall if they actually did or not in the end.
New Horizon on 26/9/2012 at 12:36
Quote Posted by ToxicFrog
The source code
did appear. It was huge news.
It wasn't an official release by Eidos/EA, though, it was (IIRC) someone finding a CD containing a half-finished Dreamcast port of Thief 2 (with most of the code for SS2 still intact, since T2 uses a later version of the same engine) in a box of LGS memorabilia. So there was a lot of concern over Eidos/EA handing out cease-and-desist letters or lawsuits if anyone tried to actually do anything with it. I don't recall if they actually did or not in the end.
Yeah, it was some guy who bought a Playstation dev kit off of Ebay years ago and never bothered to look at the discs that came with it.
ToxicFrog on 26/9/2012 at 12:41
Quote Posted by retractingblinds
I'm having a good deal of misfortune getting this patch to work with Thief Gold. I've followed the installation instructions, checked out the readme in the /docs/t1.zip directory, changed the game running to read 'dark1' exclusively (sans apostrophes), and still, no dice. The game boots, and crashes immediately. I've looked for ; enable Thief 1 compatibility in cam_ext.cfg and found no such line. I'm at quite a wall here with no clue what solutions to try.
Anyone care to treat me like an idiot and give me a step-by-step setup for a fresh install? If it's of any assistance, I am running a GoG copy on WinXP.
There's no "; enable Thief 1 compatibility" line because you can add that yourself...it's just a comment, the game doesn't care. I don't know why you keep changing 'game dark' to 'game dark1', that's not what you're meant to do and people are specifically telling you not to do it.
Step by step instructions, assuming you're starting with a clean GOG install of TG. Hopefully these are clear enough.
(1) DO NOT TOUCH YOUR CAM.CFG. DO NOT CHANGE THE 'game' LINE. IT SHOULD CONTAIN 'game dark' WHEN YOU INSTALL IT AND STILL CONTAIN THAT WHEN YOU START IT. DO NOT TOUCH CAM.CFG.
(2) Unpack the Thief 2 1.19 patch to get the contrib.zip and new_dark.zip files.
(3) Unpack both of those files into your Thief directory. Overwrite existing files if necessary.
(4) Create a directory in your Thief directory named "patch", if one does not already exist.
(5) Open the file doc/T1.7z. Unpack the file INTRFACE.CRF from that archive to the patch/ directory you just created. patch/ should now contain the single file INTRFACE.CRF.
(6) Open cam_ext.cfg in notepad. On a line by itself, add the single word 'dark1'. DO NOT PUT 'game' IN FRONT OF IT. DO NOT EDIT CAM.CFG. JUST PUT 'dark1' ON A LINE BY ITSELF SOMEWHERE IN cam_ext.cfg. THAT IS ALL.
(7) Optionally, edit other settings in cam_ext.cfg to enable things like bloom.
(8) Run Thief2.exe, NOT Thief.exe, to play.
ZylonBane on 26/9/2012 at 12:41
Quote Posted by New Horizon
Yeah, it was some guy who bought a Playstation dev kit off of Ebay years ago and never bothered to look at the discs that came with it.
Dreamcast.
MoroseTroll on 26/9/2012 at 12:43
Looks like ATI/AMD should patch its graphics driver soon :ebil:.
BTW, did anybody run this patch on a non-nVidia&ATI graphics hardware: I mean integrated graphics from Intel and rare nowadays S3/VIA? I wonder how smooth and correct the game works on them. According to the Steam statistics, Intel graphics is getting bigger share for a few last years, and that's why I'd like to know what notebook (actually, what graphics in it) I should buy in order to play Thief 2 with no problem. Anyone?
hard thief kyd on 26/9/2012 at 12:43
Quote Posted by MoroseTroll
It's working. I thought this patch was just a someone's joke, but it's REALLY working :)!
Quote Posted by Vae
Yep...I can confirm that.
PRAISE THE BUILDER, IT'S ACTUALLY WORKING...LET THE CELEBRATION BEGIN!!!...:D:cool::D:cool::D:cool::D:cool:
Well, I will check it out later, but I trust you guys. SO, ALRIGHTY THEN! Thanks to mystery coder we can say FINALLY!!!
BUILDER BLESSED US!!! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES! YES!
Mr. headbone on 26/9/2012 at 12:53
I ran into a problem ; after loading a previous save in the vanilla game; the in games load screen resolution is smaller; 1024 x 720; while in game is 1920x1080. I've poked around in cam.cfg and can't seem to find out the problem. Any ideas? Thanks.
jivemuffin on 26/9/2012 at 12:56
Quote Posted by Albert
And after all the initial reactions I had a few minutes ago are coming down to me downloading the Thief 2 demo. Shall I be the one to confirm that 1.19 works on wine/crossover? I guess so... :D
Yup, another user confirming it works on Wine, using Ubuntu 12.04. I just happened to make a switch for work related reasons, and here this comes, and I'm running Thief 2 at my monitor's native resolution. This makes me a lot more happy than I should be. :)
